Solar road stud SD-RS-SG3

Short Description:


  • Power supply: Solar Panel (monocrystalline 5V/90mA)(1.2V/1300mAh)
  • Battery: ithium battery 3.2V/1000mah (1.2V/1500mAh)
  • LED colors: Yellow,White,Red,Green,Blue
  • Water proof: IP68
  • Product Detail

    Product Tags

    Product Detail

    Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar powered marker lights is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, led road reflectors produced by our company owns competitive price and offers more choice to global traffic road safety market and trustworthy partners all over the world.

    The base of this solar powered marker lights is made of cast aluminum, and the surface is made of plastic spraying technology.
    The shell is made of reinforced PC material, which has excellent impact resistance and heat stability.
    Loading capacity more than 40 tons, can be used in the middle of road.

    Roadway lighting systems are now widely accepted as essential for controlling traffic flow in a wide number of applications. In practice, such systems operate well above the road surface and use a number of well known and widely accepted colours, with lights in particular orientations to make the message to a driver clear and univocal thereby improving the outturn of the road while enhancing safety aspects.

    Product name  Wistron SD-RS-SG3 solar road stud
    Body material Heavy duty casting Aluminium
    Power supply Solar Panel (monocrystalline 5V/90mA)(1.2V/1300mAh)
    Battery Lithium battery 3.2V/1000mah (1.2V/1500mAh)
    LED 3pcs/side  φ10mm super brightness LED
    LED colors Yellow,White,Red,Green,Blue
    Flashing model flashing  or constant
    Water proof IP68
    Life span 3 years for lithium battery
    Resistance > 20tons(static)
    Working model Blinking or Constant(charging at daytime and working automatically at night)
    Working hours 200 hrs for flashing modes,100hrs for steady modes
    Visual distance > 800m
    Size Φ120mm*50mm
    Package 1pcs/box; 32pcs/Ctn;Weight:26.1Kg;  Carton size:54*28*26cm

    Working Principle of Solar Road Stud Light

    During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

    Installation Method Of Embedded Solar Road Stud

    1. Carefully mark distance between placement of solar road stud lights.To prevent an adverse effect on ground,use a proper tool such as Core Drill.Drill Φ120mm and depth will be 50mm.
    2. Remove all debris from installation hole.
    3. Pour epoxy into the holes per manufacturer's instruction.
    4. Verity that the installation hole is straight.Verity that the installation hole is large enough to allow epoxy to surround the solar led road stud shaft.
    5. Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft.
    6. After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility. 
     
    The recommended spacing between each solar road studs are as follows:
    Highways and Expressways       
    7 - 8 yards (5 - 6 meters)
    Dangerous Entrances and Exits       
    4 - 5 yards (2 - 3 meters)
    Access or Exit ways for Hospitals, Parking Lots, etc.       
    0.5 - 3 yards (0.5 - 2 meters)

    The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.

    Application

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)

    Solar road stud SD-RS-SA3 (2)


  • Previous:
  • Next:

  • RELATED PRODUCTS